Pfannenberg EB 2.0 Serie Cahier D'instructions page 7

English
5 Positioning the Chiller
Place the Chiller in an area shielded from any possible manufacturing residuals (shavings, dust, etc.) and well-ventilated, away
from heat sources and direct influence of sun light ; if possible, near the user system, in order to avoid load losses along the
hydraulic connection pipes. Use the adjustable feet (where installed) to level off the cooling unit.
Not intended use
: chiller can't be installed on mobile floor, or conveying vibrations, oscillating or inclined one.
The customer has to place a suitable room at disposal, as shown in the figure:
For chillers equipped with only one condensers (EB 32 - 44 - 65 - 80 - 95 - 140 - 160), follow the indications of figure 2a
Picture 2a – Room minimum dimensions
7
70040-167_01-__(EB2.0_Op._Manual_EN-DE-IT-ES-FR-RU).docx