9
Ambient temperature
Chiller is designed to operate in the ambient temperature range indicated in the type label. When ambient temperatures are out
of that range, manufacturer must be consulted.
10
Start up of the chiller
CAUTION!
QUALIFIED PERSONNEL!!!
CAUTION!
TO AVOID AN UNDEFINED OPERATING STATUS, A FUNCTIONAL RESTRICTION, OR A DEVICE
FAULT, AFTER SWITCHING OFF THE CHILLER, WAIT FOR ABOUT 30 SECONDS BEFORE TURNING IT ON AGAIN!!!
NOTE: The following instruction will guide you through the start up procedure in detailed steps. For a quick
commissioning instruction please see appendix A.
•
Turn main switch, control switch, all circuit breakers to switches to the - 0 - (off) position.
70040-167_01-__(EB2.0_Op._Manual_EN-DE-IT-ES-FR-RU).docx
English
WORK ON THE ELECTRICAL AND REFRIGERANT CIRCUITS MAY ONLY BE PERFORMED BY
Picture 7 – Main switch OFF
14
Picture 8 – Circuit breakers OFF