resideo Braukmann L5 Manuel D'installation page 3

Valve Open
1. Push the power button on L5 WiFi Water Leak Shutoff
Valve, or tap the open command in the app's menu.
2. The valve opening process is initiated. The status LED
is pulsing green.
3. The valve is open. The status LED is solid green.
EMERGENCY BALL VALVE CLOSE /
OPEN
The handle on the L5 actuator is intended to be used for
emergencies only. For example, during a power outage.
Please follow the steps below if you need to use the
emergency handle:
1. Unplug the L5 WiFi Water Leak Shutoff Valve from the
power supply.
2. Push on the lever until it touches the actuator's top
cover. You should feel minimum resistance. This step is
important to allow the handle to be detached from the
gearbox.
3. While pushing down the handle, turn the lever clockwise
to close the ball valve. You may feel some resistance
just like when you are closing a regular ball valve.
4. To open the valve, push down the handle while turning it
counterclockwise. You may feel some resistance just
like when you are opening a regular brass ball valve.
IMPORTANT
Since the handle is intended to be used in emergen-
cies only, when using the emergency handle to close
the valve, the valve status change does not synchro-
nize with the app.
PAIR L5 WITH WATER SENSOR(S)
L5 works with both Resideo's new L1 and the original WiFi
Water Leak and Freeze Detector. The detector(s) and L5 need
to be set up in the same location in the app in order for the
devices to be paired with each other.
You can choose which specific detector(s) you want to enable
L5's automatic shutoff function. You can change the setting
at any time under "LEAK PROTECTION". This can be found on
the bottom of L5's home page in the app, or as a first time
user, you will be taken through the setup of this function
automatically.
A B
Inch Inch
Model (mm) (mm)
VWS01Y-1/2 2.598 4.567
(66) (116)
VWS01Y-3/4 2.953 4.567
(75) (116)
VWS01Y-1 3.583 4.567
(91) (116)
Table 3. Dimensions.
C D E F
Inch Inch Inch Inch
(mm) (mm) (mm) (mm)
2.677 3.976 3.228 4.606
(68) (101) (82) (117)
2.677 4.252 3.228 4.685
(68) (108) (82) (119)
2.677 4.409 3.228 5.000
(68) (112) (82) (127)
MAINTENANCE CYCLE
This function can be found under "Settings" or you will
automatically be taken through the setup process as a first
time user. It's designed to close, then immediately open your
L5 valve regularly to prevent the valve gets stuck. We
recommend you set the maintenance cycle to take place at
least every 2 months.
IMPORTANT
— To prevent unintended water supply, the valve mainte-
nance cycle will not perform when the valve is in the
closed position.
— If you are considering having the valve permanently
closed, manually open, then close the valve at least
every 2 months.
SYNCHRONIZE THE VALVE
POSITION WITH APP STATUS
If for any reason, the valve's position does not match the
valve's status in the app, take the following steps to
synchronize the valve with the app's status.
1. Unplug the actuator from the power supply.
2. Plug back in the power supply. Once the L5 Actuator is
powered back up, it will operate the valve to the last
known position. Wait a few minutes until the status LED
is either solid red or solid green.
3. Now you should be able to see the valve status in the
app is aligned with the actual valve status.
TECHNICAL SPECIFICATIONS
Dimensions
A
Fig. 7. Dimension diagram.
Power
Supply
G Length
Inch Inch
(mm) Thread (m)
5.157 NPT 118
(131) 1/2 Inch (3)
5.669 NPT 118
(144) 3/4 Inch (3)
5.984 NPT 118
(152) 1 Inch (3)
3
L5 WIFI WATER LEAK SHUTOFF VALVE
B
C
E
D
G
THREAD
F M38788
Description
WIFI ACTUATOR WITH WLD SENSOR AND
1/2" NPT BALL VALVE
WIFI ACTUATOR WITH WLD SENSOR AND
3/4" NPT BALL VALVE
WIFI ACTUATOR WITH WLD SENSOR AND 1"
NPT BALL VALVE
33-00607EFS—05