Ribimex Ribiland PRSC500/170N Manuel D'instructions Et D'utilisation page 37

Danger! Only use saw blades in compliance with the technical specifications and to EN 847-1 - parts
of unsuitable or damaged saw blades can be brutally projected like an explosion.
Do not use:
• high speed steel saw blades (HS or HSS);
• saw blades with visible damage;
• cutting wheels.
4.5- Electrical Requirements
With a 230V~ 50Hz motor, the machine should be connected to standard 230V10% (50Hz1Hz).
The mains connection should be fused for a maximum of 16A.
The electrical supply must be fitted with protection devices of under-voltage, over-voltage, and
over-current as well as a residual current device (RCD), which maximum residual current rated at
0.03A.
4.6- Moving the log saw
WARNING: The machine is very heavy, do NOT move by hand if you are not physically strong enough,
as a falling or tripping machine may cause considerable damage and severe injury!!
The log saw is equipped with 2 wheels for minor moves.
To move the log saw to the working area, hold the handle and slightly tilt the saw.
The wheels are not intended to carry or tow the log saw over long distances.
Do not tow on open road.
Do not use the saw to transport persons or objects.
V. OPERATION
5.1- Intended use
The log cutting saw is a machine intended to cutting firewood as detailed in these instructions, in
which the log is cut by means of rotating saw blade.
The log cutting saw is only suitable for stationary operation.
The saw is solely intended for private use for DIY and home/garden use.
Metal parts (e.g. nails, wire, etc...) must be removed from the log wood.
Do not use the machine for purposes not appropriate (e.g. cutting products containing hazardous
materials ...), or for any use not described in this manual
The machine is designed to be used by one person only. Other persons shall keep a sufficient distance
to the machine.
Observe and follow applicable national or local work safety standards with machines related to
accident prevention and safety regulations.
The machine may only be used and maintained by persons who are familiar with it and who have
been informed about the dangers connected to it.
Unauthorized modifications to the machine release the manufacturer, the distributor and/or reseller
from any liability for any resulting damage or injury.
The machine must only be used and repaired with original accessories and tools available from the
manufacturer or your local reseller.
- Do not use the machine for any other use outside the scope of this manual.
- Any other use different from that indicated in these instructions is deemed improper and may cause
damage to the machine and present a danger to the user.
- DO NOT use nor mount on the machine accessories that are not recommended by the manufacturer.
Modifications to the machine, or use of parts not tested and approved by the equipment manufacturer
may cause unforeseeable damage
- The product is not intended for artisanal, commercial, professional and/or industrial use.
Page 37 of 43