Princess Caffe Italiano One-Touch 242124 Mode D'emploi page 23

Caution! Follow the instructions below to put
coffee pads into the coffee pad cassette:
- Use the side marked '1' on the coffee pad
cassette for one cup of coffee. Use the side
marked '2' on the coffee pad cassette for
two cups of coffee.
- Lightly tap the coffee pad with your fingertips
to evenly distribute the ground coffee in the
coffee pad. Make a small indentation in the
centre of the coffee pad.
- Put asymmetrical coffee pads in the appliance
with the flat side down.
- If you use two coffee pads at the same time,
firmly press the first coffee pad into the recess
of the coffee pad cassette with the paper
edge facing upwards. Subsequently, put the
second coffee pad into the coffee pad
cassette according to the instructions above.
Set the locking collar (8) to position 'C'.
Remove the coffee pad cassette (13) from
the appliance.
Put the coffee pad in the coffee pad cassette
(13).
- For one cup, put the coffee pad in the side
marked '1' on the coffee pad cassette
(fig. F1).
- For two cups, put the coffee pads in the
side marked '2' on the coffee pad cassette
(fig. F2).
Insert the coffee pad cassette (13) into the
appliance with the coffee pad upwards.
Make sure that the coffee pad does not shift.
Set the locking collar (8) to position 'A' as
close as possible (see arrow in fig. C).
Place the required amount of cups under
the coffee dispenser (10).
- For one cup, place the cup under both
dispenser nozzles of the coffee dispenser
(fig. I1).
- For two cups, place one cup under the
left dispenser nozzle and one cup under
the right dispenser nozzle of the coffee
dispenser (fig. I2).
Press the on/off button (1) to switch on the
appliance. The start/stop button (2)
illuminates red. The start/stop button (2)
becomes green when the appliance is ready
for use.
Set the cup size selector (6) to the required
position.
Set the beverage selector (7) to position 'B'.
Press the start/stop button (2).
To interrupt the process, press the start/stop
button (2) again.
If the process is completed, set the locking
collar (8) to position 'B'.
Making coffee with ground coffee
(fig. A, C, D, E, G, H & I)
on the quality of the coffee.
Set the locking collar (8) to position 'C'.
Remove the coffee pad cassette (13) from
the appliance.
If required, insert the paper filter (22) in the
ground coffee cassette (14).
Put the ground coffee in the ground coffee
cassette (14).
- If you want regular coffee, put ground
coffee in the ground coffee cassette.
- If you want espresso, put espresso
powder in the ground coffee cassette.
Place the lid (23) on the ground coffee
cassette (14).
Put the ground coffee cassette (14) in the
side marked '2' on the coffee pad cassette
(13).
Insert the coffee pad cassette (13) into the
appliance with the ground coffee cassette
upwards.
Set the locking collar (8) to position 'A' as
close as possible (see arrow in fig. C).
Place the required amount of cups under
the coffee dispenser (10).
- For one cup, place the cup under both
dispenser nozzles of the coffee dispenser
(fig. I1).
- For two cups, place one cup under the
left dispenser nozzle and one cup under
the right dispenser nozzle of the coffee
dispenser (fig. I2).
Press the on/off button (1) to switch on the
appliance. The start/stop button (2)
illuminates red. The start/stop button (2)
becomes green when the appliance is ready
for use.
Set the cup size selector (6) to the required
position.
23