Fein AMM 700 MAX Mode D'emploi page 16

en
16
Translation of the Original Instructions.
en
Symbols, abbreviations and terms used.
Symbol, character
WARNING
Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the Gen-
eral Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving back and forth.
Warning against sharp edges of application tools, such as the cutting edges of the cutter
blades.
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Before commencing this working step, remove the battery from the power tool. Oth-
erwise there may be danger of injury caused by unintentional starting of the power
tool.
Use eye protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Gripping surface
Switching on
Switching off
Additional information.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g. against continu-
ous intense sunlight.
Observe the information in the adjacent text!
Confirms the conformity of the power tool with the directives of the European Com-
munity.
This symbol confirms the certification of this product for the USA and Canada.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.