Publicité
Les langues disponibles
Les langues disponibles
7.1 Using the detergent
A
B
30
20
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door.
• You have not pressed Start to start the
programme.
• The programme is completed.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. The indicator and the dura-
tion of the last set programme come
on.
3. Close the appliance door.
4. Set a programme.
• If you want to start the last set pro-
gramme, press Start
• If you want to set the MyFavourite
programme, press MyFavourite.
The indicators that are related to the
MyFavourite programme and op-
tions come on.
• If you want to set a different pro-
gramme, press Program again and
again until the indicator of the pro-
gramme you want to set comes on.
You can also set the applicable op-
tions.
1.
2.
3.
A
+
-
4.
C
5.
5. Press Start to start the programme.
Starting a programme with delay
start
1. Set the programme.
2. Press Delay again and again until the
3. Press Start to start the countdown.
When the countdown is completed, the
programme starts.
Press the release button (B) to open
the lid (C).
Put the detergent in the compartment
(A) .
If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
If you use detergent tablets, put the
tablet in the compartment (A).
Close the lid. Make sure that the re-
lease button locks into position.
The display shows the duration of the
programme.
• When the programme starts, only
the programme duration and the
programme bar are visible. If you
want to see which programme and
options are set, press any touchpad
(not Reset). The set programme and
options are visible for a few sec-
onds.
• The programme duration starts to
decrease with steps of 1 minute.
display shows the delay time you want
to set (from 1 to 24 hours). The Delay
indicator comes on. The programme
indicator, programme bar and option
indicators are no longer visible.
• If you want to see which pro-
gramme and options are set, press
any touchpad (not Reset). The set
programme and options are visible
for a few seconds.
ENGLISH
31
Publicité
