Bosch GNH 18V-50 M Professional Notice Originale page 19

(21) Status bar
(22) Battery charge indicator
(23) Low service due indicator
(24) High service due indicator
(25) Reset button
(26) Mode button
(27) Single actuation indicator
(28) Contact actuation indicator
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless nailer
Article number
Rated voltage
Actuation systems
– Single actuation with
safety run
– Contact actuation with
automatic return
Fastener
– Type
– Length
– Diameter
– Angle
Max. magazine capacity
Dimensions (without bat-
tery)
– Height
– Width
– Length with workpiece
protector
Weight according to
A)
EPTA-Procedure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient temper-
B)C)
ature during operation
and during storage
Compatible rechargeable
batteries
Recommended re-
chargeable batteries
Bosch Power Tools
Values can vary depending upon the product and are subject to ap-
plication and environmental conditions. For further information
www.bosch-professional.com/wac.
Noise/Vibration Information
Noise emission values determined according
to EN 60745‑2‑16.
Typically, the A-weighted noise level of the power tool is:
GNH 18V-50 M
Sound pressure level 87 dB(A); sound power
level 98 dB(A). Uncertainty K = 3 dB.
3 601 D82 4..
Wear hearing protection!
V= 18
Vibration total values a
determined according to EN 60745‑2‑16:
●
a
The vibration level and noise emission value given in these
●
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
Brads
The stated vibration level and noise emission value repres-
mm 16–50
ent the main applications of the power tool. However, if the
mm 1.2
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
ga 18
noise emission value may differ. This may significantly in-
0°
crease the vibration and noise emissions over the total work-
105
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
mm 276
This may significantly reduce vibration and noise emissions
mm 96
over the total working period.
mm 337
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
kg 3.3–4.3
power tool and accessories, keeping their hands warm, and
organising workflows correctly.
°C 0 to +35
Rechargeable battery
u
°C –20 to +50
GBA 18V...
ProCORE18V...
Bosch sells some cordless power tools without a re-
GBA 18V... ≥ 2.0 Ah
chargeable battery. You can tell whether a rechargeable bat-
ProCORE18V...
tery is included with the power tool by looking at the pack-
≥ 4.0 Ah
aging.
Cordless nailer
Recommended battery
chargers
A) Depends on battery in use
B) Limited performance at temperatures < 0 °C
C) Limited performance with GBA 18V...
(triax vector sum) and uncertainty K
h
2 2
1.9 m/s , K = 1.5 m/s .
h
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
English | 19
GNH 18V-50 M
GAL 18...
GAX 18V...
GAL 36...
1 609 92A 8U9 | (22.11.2023)