Bosch GSB 18V-150 C Professional Notice Originale page 10

10 | English
Cordless drill/driver
– Steel
– Masonry
Tool holder
Max. screw diameter
Weight according to EPTA-Procedure 01:2014
Recommended ambient temperature during charging
Permitted ambient temperature during operation and
during storage
Compatible rechargeable batteries
Recommended rechargeable batteries for maximum per-
formance
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V 8.0Ah.
B) Measured with GBA 18V 1.5Ah and GBA 18V 12.0Ah.
Noise/Vibration Information
Noise emission values determined according to EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-1:
h
Drilling:
a
h
K
Impact drilling:
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
1 609 92A 73U | (14.09.2021)
mm
mm
mm
B)
kg
°C
°C
ProCORE18V... ≥ 5.5 Ah ProCORE18V... ≥ 5.5 Ah
GSR 18V-150 C
dB(A)
dB(A)
dB
2
m/s
2
m/s
2
m/s
2
m/s
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
GSR 18V-150 C GSB 18V-150 C
16
–
1.5–13
13
2.4–3.5
0 to +35
–20 to +50
GBA 18V...
ProCORE18V... ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
GSB 18V-150 C
81
92
5
< 2.5
1.5
–
–
Bosch Power Tools
16
20
1.5–13
13
2.5–3.6
0 to +35
–20 to +50
GBA 18V...
GAL 18...
GAX 18...
GAL 36...
94
105
5
< 2.5
1.5
9.5
1.5