Télécharger Imprimer la page

Pelgrim GVW461ONY Mode D'emploi page 90

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
Cleaning the spray arms
It is essential that you clean the spray arms on a regular basis. In the longer term, waste can
block the nozzles and the bearings in the spray arms. Clean the spray arms as follows:
Cleaning the door
Clean the edge of the door, including the sealing rubber, with a soft, damp cloth. Take care to
ensure that water does not enter the door locking mechanism or electrical components. Spray-
type cleaning products should not be used, nor aggressive cleaning products such as scourers.
These cleaning products can damage the finish.
EN 18
• To remove the upper sprayarm, hold the nut , rotate the arm
clockwise to remove it. To remove the lower spray arm, pull out the
spray arm upward.
• Clean the spray arms in warm, soapy water, using a soft brush to
clean the nozzles.
• Rinse the spray arms thoroughly before fixing back in place.

Publicité

loading

Ce manuel est également adapté pour:

Gvw461ony/p01Gvw461ony/p02