9. Technical data
Model number
Image sensor
Camera type
Resolution
Pixels (effective)
Lens
Horizontal angle of view
Day/night switching
Minimum illumination (colour)
Minimum illumination (B/W)
Minimum illumination (IR)
Image integration
Noise reduction
Electronic shutter control
Camera control
Backlight compensation
Privacy masking
Digital zoom
Video system
IR LEDs
IR range
Connections
Power supply
Power consumption
Operating temperature
Humidity
Dimensions (H x)
Weight
The IR range is strongly dependent on the environmental conditions. If the area in the camera's
field of view reflects poorly or if there are no objects within the max. illumination range, the
brightness of the video image at night may be too low. This will result in poor usability of the
video image.
In addition, when installing the camera it must be ensured that no objects are located in close
proximity to the camera's field of view (e.g. roof gutter or wall). These objects can reflect back
the IR light, resulting in circular fading on the video image in the opposite direction to the object.
1/3 inch progressive scan CMOS
1080p25, 1080p30
1920 (H) x 1080 (V)
2.8 mm, fixed lens
Electromechanical IR cut filter
0.01 Lux (image integration on)
2D DNR, 3D DNR
1/25 s to 1/50,000 s
On-screen display (OSD) (only via ABUS HD-TVI DVR)
8 freely configurable masks
Video signal (HD-TVI, BNC), video signal (FBAS, BNC), power
supply (DC), 2-pin for WDR on/off
Max. 340 mA (max. 4 W)
38
HDCC32500
Mini dome
103.5°
0.1 Lux
0 Lux
2x–16x
DWDR
Yes
HD-TVI
24
10 m
12 V DC ± 10%
-20°C–+60°C
Max. 90%
59.1 x 89.6 mm
250 g
English