Abus HDCC32500 Manuel Utilisateur page 34

COLOUR The camera stays in colour mode permanently. The infrared cut filter is
constantly in front of the lens, and the IR LEDs are constantly off.
B/W The camera stays in black/white mode permanently. The infrared cut filter is
constantly separated from the lens. The IR LEDs are switched on and off
automatically by the photo sensor.
RETURN Return to previous menu screen
NOISE REDUCTION
Function Description
2DDNR Noise reduction function, optimised for static picture content
ON:
OFF: Function deactivated
3DDNR Noise reduction function, optimised for movement (image to image view)
ON:
OFF:
RETURN Return to previous menu screen
SPECIAL
Function Description
TITLE OFF:
ON:
Use the control buttons to navigate the cursor to the desired character. All
available characters are displayed. Press ENTER to select the character.
←
←
CLR
POS
END
D-EFFECT This menu item provides a number of digital functions for modifying the video
image.
FREEZE:
MIRROR:
D-ZOOM:
S/N:
SMART D-ZOOM:
SELECTION:
DISPLAY:
SENSITIVITY:
D-ZOOM:
Function activated
Function activated
Function deactivated
Deactivate title overlay in video image
Activate title overlay in video image, if a title has been assigned. Press
the ENTER button to go to the submenu.
Move the cursor on the title line to the left
Move the cursor on the title line to the right
Clear the entire title line
Change the position of the title overlay. Select POS, then press ENTER
and use the control buttons. Pressing ENTER again takes you back to
the previous menu level.
Exit the menu
Freeze the video image
Horizontal mirroring and vertical rotation (horizontal and
vertical mirroring) functions are available.
Digital zoom in the video image. Zoom factor setting.
Modify the section in the video image with active digital
zoom.
Automatic digital zoom in a selected area of the video
image, triggered by the camera's internal motion detection.
Two areas can be configured for the automatic digital
zoom function. The selection is made using the left/right
buttons.
Activate/deactivate the preview frame. The position of the
area can be changed using the ENTER button.
Sensitivity for motion detection.
Zoom factor setting after detecting motion in the configured
34
English