Abus HDCC32500 Manuel Utilisateur page 35

TIME:
STANDARD:
The SMART D-ZOOM function becomes active only after exiting the camera
menu.
NEGATIVE IMAGE: Display the video image as a negative.
MOTION The camera's internal motion detection is integrated into the processor platform
by default. This camera type does not have an interface (e.g. alarm output) to
allow this function to be used.
OFF: Deactivate the function
ON:
AREA SELECTION (1~4):
AREA DISPLAY (ON/OFF):
SENSITIVITY (0~100):
MOTION IND. (OFF/ON):
STANDARD:
PRIVATE ZONES This function allows private zones to be set up in the video image to protect
areas that are not to be monitored.
AREA SELECTION (1~8): Selection of an area for the configuration
AREA DISPLAY (OFF/INV./COLOUR/MOSAIC):
POSITION:
SIZE:
COLOUR (0~15):
RATIO/TRANSPARENCY (0~3):
STANDARD:
DEFECT Function for correcting defective pixels in the image sensor
LIVE (ON/AUTO/OFF):
STATIC DPC (ON/OFF):
RETURN Return to previous menu screen
SET
Function Description
SHARPNESS Edge and surface sharpness setting (modification of the video image by the
software) (0~15)
MONITOR Adjustment of the camera signal to the output device or to the next connected
device.
LCD:
GAMMA:
BLUE GAIN (0~100):
RED GAIN (0~100):
area.
Duration of the automatic digital zoom. Afterwards, full-
screen mode is reactivated.
Reset all settings made to the SMART D-ZOOM function.
Activate the function
Change the position of the mask
Change the size of the mask
Colour selection (only for marking type COLOUR)
Reset all settings made to this function.
Active continuous correction of pixels
Static correction of defective pixels on restart
Optimisation for LCD monitors
Automatic or fixed gamma value setting
Blue value setting
Red value setting
Selection of area (max. four)
Activate/deactivate the preview frame. The
position and size of the area can be changed
using the ENTER button.
Sensitivity for motion detection.
A mark is displayed in the corresponding area
in the live view when motion is detected.
Reset all settings made to this function.
Selection of marking type.
Press ENTER for:
Intensity of the colour display
(transparency)
35
English