WDR BRIGHT (0~60):
WDR OFFSET (0~60):
BLC
Backlight compensation. The function displays light areas of the video image
darker, whilst maintaining the brightness of dark areas.
GAIN (LOW/MEDIUM/HIGH):
AREA (POSITION/SIZE):
STANDARD:
HSBLC
This function marks areas above a certain brightness level black. This function
may be used, for example, solely at night for oncoming vehicle headlights. In
this case, the headlights will be marked black. The registration plates next to the
headlights will then be more easily identifiable.
SELECTION (AREA 1~4): Selection of one of max. four areas. The function is
DISPLAY (ON/OFF):
LEVEL (0~100):
MODE (PERMANENT/NIGHT-TIME ONLY):
MASKING (ON/OFF):
STANDARD:
RETURN
Return to previous menu screen
WHITE BALANCE
Function
Description
ATW
Auto tracking white balance
White balance is performed by the camera automatically and continuously
updated.
AWC -> SET
With this function, white balance is performed once after pressing the ENTER
button and stored permanently.
MANUAL
Manual setting of the white balance
BLUE (0~100): Proportion of blue in video image
RED (0~100):
RETURN
Return to previous menu screen
DAY&NIGHT
Function
Description
EXTERN.
The day/night switching (ICR/IR) is controlled by the photo sensor integrated
into the camera (switching threshold: 5–15 Lux)
IR LED (ON/OFF):
Move basic setting on a brightness scale
Change basic gain factor
Setting of the reference area for the
calculation. Press ENTER to change the
position with the control buttons. Press ENTER
again to change the size with the control
buttons.
Press ENTER to reset all parameters of the
BLC function to the factory settings.
applied in this area.
Activate/deactivate the area. Press ENTER once
or twice to adjust the position and size with the
control buttons.
Brightness threshold over which a pixel is marked black.
function or only when in night mode
Activate or deactivate all areas.
Press ENTER to reset all parameters of the
HSBLC function to the factory settings.
Proportion of red in video image
The integrated IR LEDs can be deactivated in night mode if
required.
33
Intensity of the function
Permanent activation of the
English