Publicité
Les langues disponibles
Les langues disponibles
Reverse Door
5.
Take the hinge pin out of the hinge bracket. Turn the bracket around and tighten the pin again.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
se Door
w and remove the bottom hinge pin, turn the bracket over and replace it.
oor
se Door
move the bottom hinge pin, turn the bracket over and replace it.
w and remove the bottom hinge pin, turn the bracket over and replace it.
Unscrew
Unscrew
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
6.
Attach the screws, hinge bracket and adjustable foot to the opposite side of the bottom. Loosely
Unscrew
feet.
secure.
bracket fitting the bottom hinge pin. Replace both adjustable
bracket fitting the bottom hinge pin. Replace both adjustable
fitting the bottom hinge pin. Replace both adjustable
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
7.
Carefully set the door back into place. Ensure the door is aligned horizontally and vertically so that
e door back on. Ensure the door is aligned horizontally and
the seals are closed on all sides before finally tightening the top hinge. Insert the hinge back and
y, so that the seals are closed on all sides before finally
ng the top hinge.
screw it to the top of the appliance.
e door back on. Ensure the door is aligned horizontally and
y, so that the seals are closed on all sides before finally
ng the top hinge.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
8. Put the top cover and fix it with 2 screws on the back.
p hinge.
op cover and fix it with 2 screws on the back.
8.
Put the top cover back and fix it in place with the screws.
op cover and fix it with 2 screws on the back.
9. Fix the thermostat knob.
r and fix it with 2 screws on the back.
hermostat knob.
hermostat knob.
at knob.
USE
TEMPERATURE CONTROL
The freezer is controlled with a temperature control knob located inside the appliance.
Adjust the control knob as desired to suit your individual preference. There are three
different settings, with MIN being the warmest and MAX the coldest.
Position MED is the recommended position for normal use.
www.domo-elektro.be
Unscrew
8
8
8
Screw
Screw
Screw
screw
screw
screw
8
Screw
screw
51
DO1072DV
Publicité
