Publicité
Les langues disponibles
Les langues disponibles
s unplugged and empty.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
oor
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
slip during the door reversing process.
s unplugged and empty.
d must be saved to do the reinstallation of the door.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
it flat as this may damage the coolant system.
slip during the door reversing process.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
2 people handle the unit during assembly.
d must be saved to do the reinstallation of the door.
Door
1.
Remove the screws on the back of the top cover.
s unplugged and empty.
it flat as this may damage the coolant system.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
2 people handle the unit during assembly.
slip during the door reversing process.
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
d must be saved to do the reinstallation of the door.
ews at rear side of top cover.
it flat as this may damage the coolant system.
it is unplugged and empty.
2 people handle the unit during assembly.
or off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
ews at rear side of top cover.
not slip during the door reversing process.
ved must be saved to do the reinstallation of the door.
unit flat as this may damage the coolant system.
at 2 people handle the unit during assembly.
ews at rear side of top cover.
screws at rear side of top cover.
2.
Remove the top cover from the freezer.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
over and thermostat knob, then place it aside.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
3.
Remove the three screws and then remove the top hinge that holds the door in place. Lift the door
and place it on a padded surface to prevent it from being scratched.
ge and then remove door and place it on a soft pad to
hinge and then remove door and place it on a soft pad to
.
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
4.
Remove the bottom screw, hinge bracket and adjustable foot from the bottom of the appliance.
om hinge. Then remove the adjustable feet from both
50
DO1072DV
7
7
7
7
unscrew
unscrew
unscrew
unscrew
Publicité
