Publicité
Les langues disponibles
Les langues disponibles
s unplugged and empty.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
oor
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
slip during the door reversing process.
s unplugged and empty.
d must be saved to do the reinstallation of the door.
oor
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
it flat as this may damage the coolant system.
slip during the door reversing process.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
2 people handle the unit during assembly.
d must be saved to do the reinstallation of the door.
1.
Retirez les deux vis situées à l'arrière du couvercle supérieur.
s unplugged and empty.
it flat as this may damage the coolant system.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
2 people handle the unit during assembly.
slip during the door reversing process.
s unplugged and empty.
d must be saved to do the reinstallation of the door.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
ews at rear side of top cover.
it flat as this may damage the coolant system.
slip during the door reversing process.
2 people handle the unit during assembly.
d must be saved to do the reinstallation of the door.
ews at rear side of top cover.
it flat as this may damage the coolant system.
2 people handle the unit during assembly.
ews at rear side of top cover.
ews at rear side of top cover.
2.
Retirez le couvercle supérieur du congélateur.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
3.
Retirez les vis puis enlevez la charnière supérieure qui tient la porte en place. Enlevez la porte et
placez-la sur une surface rembourrée pour éviter qu'elle ne se raye.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
4.
Retirez la vis du bas, le support de charnière et le pied réglable du bas de l'appareil.
hinge. Then remove the adjustable feet from both
www.domo-elektro.be
7
7
7
7
unscrew
unscrew
unscrew
unscrew
23
DO1072DV
Publicité
