Publicité
Les langues disponibles
Les langues disponibles
TEMP Mode (15 settings)
This mode is best when more accurate cooking temperature control is needed. It is important to
realize that the following settings measure the temperature of the base of your cookware and not the
temperature of the food you are cooking.
1.
Touch the FUNCTION symbol to select the TEMP mode. The default temperature is 100°F
(simmer). Use the CONTROL KNOB to increase (clockwise) or decrease (counter-clockwise) the
temperature as needed.
2.
The one-touch SIMMER function will instantly select the 100°F setting.
3.
TIMER/TEMP Operation: A maximum of 180-minutes is possible when using the temp mode.
Touch the TIMER symbol and adjust the number of minutes by turning the CONTROL KNOB. The
minutes will be displayed in the LCD display.
4.
Touch the LOCK symbol at any time to lock in your desired setting. To unlock, touch and hold the
LOCK symbol for 3 seconds or power the unit off.
SIMMER
LOW
MED-LOW
TEMPERATURE PROBE MODE FOR PRECISE TEMPERATURE CONTROL
When precise temperature control is needed for the food being cooked, use the TEMPERATURE
PROBE. Selected temperature will be maintained within +/- 5º.
1.
Before connecting the TEMPERATURE PROBE completely shut-down the unit by turning it off
and unplugging.
2.
Locate the TEMPERATURE PROBE located in its storage location at the back of the unit. Remove
the black PROBE CAP. Align the notch on the bottom of the black connector on the end of the
PROBE with the PROBE INPUT and push in. Screw the knurled nut clockwise for a secure
connection. If it is not connected properly "NO" will appear in the LCD display. Repeat the
process for a better connection.
3.
Clip the PROBE to the inside of the pan so that it is submerged in the pan contents or insert it
into the meat you are cooking. It should not touch the bottom of the pan.
4.
Follow the Start-Up instructions described earlier.
5.
Touch the FUNCTION symbol and select TEMP mode. Then press the TEMPERATURE PROBE
symbol.
6.
Use the CONTROL KNOB to increase (clockwise) or decrease (counter-clockwise) the
temperature as needed. Once your desired temperature has been reached the unit will continue
to maintain that temperature within +/-5º.
7.
TIMER/PROBE Operation: A maximum of 480-minutes (8 hours) is possible when using the
TEMPERATURE PROBE mode and operating between 100º- 250ºF. For safety only 180-minutes is
available when operating between 275º-450ºF. Touch the TIMER symbol and adjust the number
of minutes by turning the CONTROL KNOB. The minutes will be displayed in the LCD display.
8.
Touch the LOCK symbol at any time to lock in your desired setting. To unlock, touch and hold the
LOCK symbol for 3 seconds or power the unit off.
9.
Clean the probe after use and store.
6
100º
MEDIUM
125º-150º
MED-HIGH
175º-250º
HIGH
275º-325º
350º-400º
425º-450º
Publicité
