Danby Designer DMW11A4WDB Manuel Du Propriétaire page 8

OPERATING INSTRUCTIONS
FIRST TIME USE
When the appliance is plugged in for the fi rst time, the display will
show "12:00". Press the Clock button and then use the number pad
to enter the current time. Press the Clock button to confi rm the entry.
DURING OPERATION
• Press the Stop/Clear button to pause the functioning. Press the
Stop/Clear button again to clear the current program.
• Press the Start button to start a new program or resume a paused
program.
• When setting the appliance, it will return to standby mode if
there is no input within 25 seconds.
• The appliance will beep fi ve times at the end of a cooking
program. The appliance will continue to beep every 2 minutes
until a button is pressed or the door is opened.
SETTING THE CLOCK
The clock can be set as a 12 hour clock or a 24 hour clock. Press the
Clock button once, the display will show 12HR to indicate a 12 hour
clock. Press the Clock button twice, the display will show 24HR to
indicate a 24 hour clock.
To set the current time:
1. Press the Clock button.
2. Use the number pad to enter the current time.
3. Press the Clock button to confi rm.
During operation, press the Clock button to see the current time.
QUICK +30
Press the Quick +30 button to cook an item for 30 seconds or to
add 30 seconds to an existing program. This button can be pressed
multiple times.
7