Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL DATA
Type
Production code
Art.
Battery voltage
Rated no-load speed
Thread of work spindle
D=Grinding disc diameter max. (rated capacity)
d=Grinding disc hole diameter
b=Grinding disc thickness max.
b=Cutting disc thickness max. / min.
D=Sanding disc diameter max.
D=Wiring brush diameter max.
Weight according EPTA-Procedure 01/2014
(Li-Ion 2,0 Ah ... 12,0 Ah)
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise information: Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Wear ear protectors!
Vibration information: Vibration total values (triaxial vector sum) determined
according to EN 60745.
Vibration emission value a
/ Uncertainty K
h
Surface grinding
Disc sanding
For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.
Grinding thin sheets of metal or other easily vibrating structures with a large surface can result in a total noise emission much higher (up to 15 dB)
than the declared noise emission values. Such workpieces should as far as possible be prevented from emitting sound by suitable measures
such as the application of heavy flexible damping mats. The increased noise emission is also to be considered for both the risk assessment of
noise exposure and selecting adequate hearing protection.
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration and noise emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the accessories, keep
the hands warm, organization of work patterns.
WARNING
Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
ANGLE GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Sanding, Wire Brushing or
Abrasive Cutting-Off Operations:
ENGLISH
482 148 - Berner-BACAG-1 BL 18V.indd 24
482 148 - Berner-BACAG-1 BL 18V.indd 24
BACAG-1 BL 18V 01 00001- 99999
BBC 14.4-18V, BBC-2 14,4-18V, BBCF 14,4V-18V
a) This power tool is intended to function as a grinder, sander, wire
brush or cut-off tool. Read all safety warnings, instructions,
illustrations and specifications provided with this power tool. Failure to
follow all instructions listed below may result in electric shock, fire and/or
serious injury.
b) Operations as polishing are not to be performed with this power
tool. Operations for which the power tool was not designed may create
a hazard and cause personal injury.
c) Do not convert this power tool to operate in a way which is not
specifically designed and specified by the tool manufacturer. Such
24
BACAG-1 BL18V
Cordless Angle Grinder
412911
18 V
8500 min
-1
M14
125 mm
22,2 mm
6 mm
3 mm / 1 mm
125 mm
75 mm
2,4 ... 3,5 kg
-18 ... +50 °C
BBP18V-X, BBPP18V-X
82,6 dB (A) / 3 dB (A)
93,6 dB (A) / 3 dB (A)
5,85 m/s
/ 1,5 m/s
2
2
1,81 m/s
/ 1,5 m/s
2
2
15.06.2023 10:17:40
15.06.2023 10:17:40
Publicité
