Dual C 839 RC Notice D'emploi page 19

Copying from Records
There are two ways in which the turntable can be connected
to the unit
Erasing
FADE EDIT
well as decently pushing the obtrusive disc jockey into the
background when recording a pop program. Since fading is
carried out during playback, you can control everything using
your headphones. First find the position you want corrected,
spool the tape back somewhat, start the tape in playback in the
direction of the area to be changed, press the upper FADE EDIT
key down and the lower one in. You will now hear a short
(dependent upon the type of tape) pause — the fade-out.
As long as both buttons remain pressed, the tape will be com-
pletely erased. Once you release the lower button, the recording
will be faded-in "'softly". If you only desire to fade-in, spool
the tape back to just before the fade-in position, press the start
and PAUSE keys. Now press both FADE EDIT buttons for
several seconds, press the PAUSE button once again, so that the
tape is restarted, and release the lower FADE EDIT button.
After a short pause the fade-in will begin.
The FADE EDIT feature offers the tape user several interesting
possibilities. The time required for fade-in and fade-out is, ho-
wever, influenced by the type of tape used. You should thus
practice a bit with each type of tape so that you don't endanger
one of your favorite recordings during the first try.
Remote control of the cassette deck
The functions 4, », <4, pp, PAUSE and STOP can be re-
motely controlled.
Technical data - Drive
Electronics
Heads
Compact cassette system
19