Publicité
Les langues disponibles
Les langues disponibles
Media Options for Kinetico Series Backwashing Filters
Activated Carbon
used to remove objectionable taste, odors and color from water
Calcite
used to neutralize water by raising its pH level
Macrolite® RX Ceramic Media
used to remove extremely fine particles from water such as iron, sediment, dirt, silt
and suspended matter
How Your Kinetico Series Backwashing Filter Works
Once the media bed is loaded with the trapped particles, it must be cleansed.
This is done through a process called backwashing. During backwash, water
is forced through the media bed in the opposite flow direction of the system
to clean the particles off the media and flush them to drain. Once the process
is complete, the media is again ready to filter your water.
What Makes Your Kinetico Series Backwashing
Filter Different Is What Makes It Better
Overdrive® Enhanced Service
Kinetico Series Backwashing Filters feature Overdrive Enhanced Service—
both tanks of the twin tank system are filtering your water simultaneously.
This is the best and most thorough way to filter your water since it allows your
water to have longer contact with the filter media, improves the flow rate and
is less taxing on the system.
Non-Electric Operation
Kinetico Series Backwashing Filters are powered by the energy of moving
water, not electricity. So there's nothing to plug in, no buttons to push, timers
to set and reset, or adjustments to make. You really don't need to do anything
special to operate your Kinetico system—it runs itself, not you.
Kinetico Backwashing Filter Series
Problem water usually has something in it that
needs to be removed. Running your water
through a backwashing filter that contains the
appropriate media is basically how it's done.
The filtering media traps the matter that
needs to be filtered from your water and
allows the virtually particle-free water to leave
the system and be used throughout your
home.
4
Publicité
