Télécharger Imprimer la page

Domo DO418BL Mode D'emploi page 16

Publicité

Les langues disponibles

Les langues disponibles

DO418BL
FOR THE INITIAL USE
1. Unpack the appliance and place all parts on a horizontal surface.
2. Immerse jug, top lid and measuring cup in warm soapy water and rinse them and
dry. Never immerse motor unit in water for cleaning to prevent the risk of electric
shock.
Caution: the blade is very sharp, handle with great care.
3. The correct assembly way will be described in detail in below sections.
Before assembling the jug, be sure the power cord is unplugged from the power
outlet and the speed selector is on the 0 position.
The jug is suitable for making mixture which the juice and pulp are mixed.
For attaching jug, first place the jug into the motor unit, then turn it in clockwise .
Note: make sure the jug is assembled into the motor unit properly, there is interlock
switch on the position, if the jug is not assembled properly, the blender will not
operate.
BLENDING FRUIT AND VEGETABLE:
1. Before attaching the power cord into the outlet, make sure the speed selector is in
the 0 position.
2.
Peel or core the fruit or vegetables and then cut it into small dices, put the food
pieces into the jug. The amount of mixture should not exceed the max level as
indicated on the jug.
Note: never use boiling liquids or run the appliance empty. The jug can be used for
breaking up ice.
3. Replace the top lid on the jug. Only directly place the top lid into the jug.
4. Plug in the unit, the glass base will light up.
5. Turn the speed selector to the desired setting, the blue light of the base will start
blinking. There are four setting: P, 0, 1, 2. The 1 setting is the low speed, the 2 setting
is the high speed. Turn switch to P position and hold it to pulse actuate motor for
delicate chopping. Release it to return the 0 position.
6. You may add ingredient into the jug through the center opening of top lid during
operation, then replace Measuring Cup if necessary. Let the tab of Measuring Cup
aligns with the groove of top lid, put down and turn clockwise until it is locked.
7. The consecutive operation time shall not exceed 3 minutes. Minimum 1 minutes
rest period is required between two consecutive cycles.
8. Turn the Speed selector to 0 Position once the mixture has been blended to your
desired consistency.
9. Remove the jug from the Motor Unit (remove it by turning it anti-clockwise),
carefully take down the top lid, then pour and serve.
16

Publicité

loading