TFA 60.2025.01 Mode D'emploi page 13

TFA_No. 60.2025_Anleitung 04.03.2019
Digital alarm clock with LED digits
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks.
• Protect it from moisture!
5. Elements
A: Display (Fig. 1):
A 1: Alarm symbol
A 3: PM (12-hour system)
B: Buttons (Fig. 2):
B 1: MODE button
8:25 Uhr Seite 13
A 2: Time/indoor temperature
B 2: ALARM button
– 24 –
Digital alarm clock with LED digits
B 3: SNZ/LIGHT button B 4:
B 5: DOWN button
C: Housing (Fig. 3):
C 1: Battery compartment C 2:
6. Getting started
• The alarm clock can be operated with the 3 x 1,5 V AAA batteries (not included). The back-up batteries maintain
the clock operation in the event of blackout or other power failure. Continuous illumination of the display only
works with USB-/mains connection. In pure battery operation, the display is activated briefly each time a button
is pressed.
• Open the alarm clock's battery compartment. Insert three new AAA 1.5 V batteries, polarity as illustrated. Close
the battery compartment again.
• For a permanent display light and to save battery life, use the supplied DC 5V USB cable.
– 25 –
UP button
DC 5V jack