Publicité
Les langues disponibles
Les langues disponibles
Fig. 2
Lower handle
bars
Bolts
Knob
NOTE: Adjust the lower handle to the desired position for
comfortable height by aligning the line on the adjusting
gear wheel with one of the three lines on the scarifier +
dethatcher body (Fig. 3).
Fig. 3
3. Secure the two middle handle bars to the lower handle
bars using a set of knobs and bolts. Tighten the knob on
each side to ensure a secure fit (Fig. 4).
Middle
handle
bars
Lower handle
bars
Middle handle
knob + bolt
Knob
Low: 37.4 inch (95 cm)
Middle: 41.3 inch
(105 cm)
High: 45.2 inch (115 cm)
Fig. 4
8
4. Connect the upper handle frame to the middle handle bars
using the remaining knobs and bolts. Tighten the knob on
each side to ensure a secure fit (Fig. 5).
Upper handle
knob + bolt
Middle handle
bars
5. Fix the cord with the spare cord clip and the clip on the
adjusting gear wheel (Fig. 6).
Cable clips
Thatch Collection Bag Assembly
m
WARNING!
Do not attempt to use the product without
the thatch collection bag attached. This could pose a danger
of flying debris.
m
WARNING!
The product must be switched off and the
cutting device must have stopped rotating before you attach or
empty the thatch collection bag.
m
WARNING!
Never use the scarifier without the thatch
collection bag securely fitted.
NOTE: A full thatch collection bag will reduce the performance
of this product.
Fig. 5
Upper
handle
frame
Fig. 6
Publicité
