Page 1
LSW70021 5 to 10 5 a 10 minutos 5 à 10 minutes M6×35 Bolt / M6×35 Perno / M6×35Boulon Hopper bottom frame connectors / Conector del marco inferior del saco recogedor/ Connecteurs de l' armature inférieure de trémie M6 Washer / M6 Arondela / M6 Rondelle Wing Nut / Tuerca mariposa / Ecrou à...
Page 3
CLICK! Insert the beveled hook on the left side support leg into the slot positioned on the top of the side housing. Slide the bottom beveled hook into the groove on housing. Secure the bottom hook by clicking the buckle into the hole positioned on the housing as pointed by the arrow.
Page 4
At top of the hopper bag, insert the smooth ends of the two rods in to the connector and secure the two collars in the direction showing in 4c. To connect the bottom left of the hopper bag, use connector and screw it onto the threaded end of left side frame rod.
Page 5
Position ends of the hopper bag connectors snug against the back side of the main sweeper body and snap the bag and frame into place mid way up the sides of sweeper handle. Ubique los extremos de los conectores de la bolsa del cesto ajustados contra la parte trasera del cuerpo principal del barredor y encaje la bolsa y el marco en sitio a media altura de los lados de la agarradera del barredor.