Stop Watch Function - TFA 38.2029 Mode D'emploi

TFA_No. 38.2029 Anleitung_04_13
Stop watch
• Press the START/STOP button to adjust the minutes.
• Press the MODE button to confirm the settings.
• The current time appears on the display, the
alarm symbol and the icon of the day-of-the-
week is highlighted.
• When the alarm time is reached, the alarm will
ring.
• If the alarm is not stopped with the LAP/RESET
button, the alarm sound will automatically turn
off after a few seconds and will be reactivated at
the same time.
• Press the START/STOP button and the snooze
function will be activated. The alarm sound will
be reactivated after 5 minutes.
• Press the LAP/RESET and the START/STOP buttons
at the same time to activate/turn off the alarm
function.
• The alarm symbol appears/disappears on the dis-
play.
• Press the LAP/RESET button while in normal
mode to change between the time and the alarm
time.
5.3 Hourly chime
• Press and hold the LAP/RESET button while in
normal mode.
• The adjusted alarm time appears on the display.
• Press the MODE button at the same time to acti-
vate the hourly chime.
• Under all the icons of the day-of-the-week black
highlights appear.
• The hourly chime is now activated.
• To deactivate the hourly chime, press and hold
the LAP/RESET button and press the MODE but-
ton at the same time to deactivate the function.
• The black highlights disappear.
12
26.04.2013 10:47 Uhr
Stop watch

5.4 Stop watch function

• Press the MODE button while in normal mode to
enter the stop watch mode. In the stop watch
mode the black highlights are flashing.
• With the START/STOP button you can start and
stop the countdown.
• Press the LAP/RESET button to clear the count-
down.
• The total countdown will be 29 minutes and
59,99 seconds and the indication of the counted
time will be in 100th of a second interval.
• After the first 30 minutes the clock will
automatically switch to one second increment.
• After that, the smallest unit will no longer be
100th of seconds but only full seconds.
5.4.1 Split time measurement
• Press the START/STOP button to activate the
stopwatch. Press the LAP/RESET button and the
elapsed time will be displayed. The stop watch is
running in the background and by pressing the
LAP/RESET button again, the current time
appears on the display. With this function, it is
possible to measure any number of split times
from the start.
5.4.2 Storing the split time
• Start the stop watch with the START/STOP but-
ton. If the first runner arrived at the destination,
press the LAP/RESET button and with the second
runner the START/STOP button. On the display
you can read the time of the first runner and by
pressing the LAP/RESET button the time of the
second runner. Press the LAP/RESET button again
to clear the values.
Seite 7
13