Mounting - Panasonic Aquarea Air U.M. Manuel D'installation

3-WAY VALVE WITH THERMO-ELECTRIC HEAD DIVERTER VALVE KIT
5.4

Mounting

- Remove the side panel as indicated in paragraph 2.4.
- Assemble the components as indicated in figure:
- floor mounted version (fig. 20)
- wall mounted version (fig. 21) (with optional 3/4" EK
spacer stub pipe)
- Apply the supplied insulation.
Floor mounted version
1 thermo-electric head (n.1)
2 lockshield (n.1)
3 3-way valve (n.1)
Wall mounted version, with optional 3/4" EK stub pipe
1 thermo-electric head (n.1)
2 lockshield (n.1)
3 3-way valve (n.1)
22
When the hydraulic components have been mounted,
connect the thermo-electric head connectors (ref. X)
with the wiring connectors on the machine (ref. Y).
4 outlet union (n.1)
5 1/2" flexible tube 230 (n.1)
1
3
5
2
4
4 outlet union (n.1)
5 1/2" flexible tube 230 (n.1)
6 3/4'' EK stub pipe (n.1 optional)
1
3
5
6
2
4
53 27
141
100
69
U I S