Advanced Functions - BFT GSM RIC 24V Instructions D'utilisation Et D'installation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

To delete a telephone number stored in the memory.

Code to be sent

#PWDpassword#WHLposition in memoryD

In the example, the telephone number stored in position 02 in the memory is deleted.

NB: to delete the number stored in position 99, send a text message like the one in the example:

#PWD123456#WHL99D=0000000000

All telephone numbers stored in the memory are deleted.

Code to be sent

#PWDpassword#WHL99D

Free access. Access is granted to all telephone numbers that call, even those not stored in the memory

Code to be sent

#PWDpassword#ACM0 (zero)

Controlled access (default setting). Access is granted only to telephone numbers that are stored in the memory.

Code to be sent

#PWDpassword#ACM2

To enable input <IN> counter. To enable sending of messages.

1=ON

0=OFF (default setting)

Code to be sent

#PWDpassword#CTR=on off

In the example, the input <IN> counter and sending of messages are enabled.

Adding new recipients to the memory who, if authorized, will receive messages from the controller based on whichever functions are enabled below. (from 1 to 8)

Code to be sent

#PWDpassword#TELrecipient position

number=telephone number programmed for receiving

messages

In the example, the telephone number 9876543210 is added in position 1 and xxxxxxxxxx in position 6.

Lists all telephone numbers stored in the memory authorized to receive messages.

Code to be sent

#PWDpassword#TEL?

The command to be sent is made up of 8 digits:

1=ON

0=OFF

Code to be sent

#PWDpassword#RERN=on off on off

In the example, the numbers stored in positions 1, 4 and 5 are authorized to receive messages.

Checks which recipients are authorized to receive messages.

Code to be sent

#PWDpassword#RER?

In the example, the numbers stored in positions 1, 4 and 5 are authorized to receive messages.

12 -

GSM RIC 24 V

INSTALLATION MANUAL

Deleting a number stored in the memory

Sample text to be sent

#PWD123456#WHL02D

Deleting all numbers stored in the memory

Sample text to be sent

#PWD123456#WHL99D

Access mode

Sample text to be sent

#PWD123456#ACM0

Sample text to be sent

#PWD123456#ACM2