BFT GSM RIC 24V Instructions D'utilisation Et D'installation page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Set the message that will be sent to authorized recipients in the memory when <IN> contact is closed.
The message must be no more than 100 characters long. Only use letters and numbers abc/ABC/123; do not use special characters (&, %,*, etc.).
Code to be sent
#PWDpassword#STR=message text
The message that will be sent is: GATE CLOSED.
Set the message that will be sent to authorized recipients in the memory when <IN> contact is opened.
The message must be no more than 100 characters long. Only use letters and numbers abc/ABC/123; do not use special characters (&, %,*, etc.).
Code to be sent
#PWDpassword#STO=message text
The message that will be sent is: GATE OPEN.
Set the number of times the <IN> contact is closed after which, or after multiples of which, a warning message is sent to authorized recipients.
Min. 1
Max. 65535
Default setting 500
The command to be sent is made up of 5 digits:
Code to be sent
#PWDpassword#COA=number of times contact must be
closed before message is sent
In the example, message sending has been set to the 5th, 10th, 15th time etc. the <IN> contact is closed.
Function 1: (default setting)
-
The board counts the number of times input <IN> changes state. Every time the contact is closed.
-
The board sends the warning message when the counter reaches the value set by command #COA.
Function 2:
-
The board counts the number of times input <IN> changes state. Every time the contact is closed.
-
Output OUT2 is activated when input <IN> first changes state. See #RLOP function for instructions on de-energizing the relay.
-
The board sends the warning message when the counter reaches the value set by command #COA.
Function 3:
-
The board counts the number of times input <IN> changes state. Every time the contact is closed.
-
Output OUT2 is activated when input <IN> first changes state. See #RLOP function for instructions on de-energizing the relay.
-
The board sends the #STR warning message every time input <IN> is closed.
-
The board sends the warning message when the counter reaches the value set by command #COA.
Function 4:
-
The board counts the number of times input <IN> changes state. Every time the contact is closed.
-
Output OUT 2 is activated for 1 sec. every time input <IN> is closed.
-
The board sends the warning message when the counter reaches the value set by command #COA.
Function 5:
-
The board sends the #STR warning message every time input <IN> is closed.
Function 6:
-
The board sends the #STR warning message every time input <IN> is closed.
-
The board sends the #STO warning message every time input <IN> is opened.
Code to be sent
#PWDpassword#CTC=function number
Function 4 is enabled in the example.
Checks the total number of times input <IN> has changed state. The number increases every time the contact is closed.
Code to be sent
#PWDpassword#COU?
In the example, the total number of times the input has changed state is 143.
Checks the partial number of times input <IN> has changed state. The number increases every time the contact is closed and is reset when the value reaches the value set in #COA.
Code to be sent
#PWDpassword#COT?
In the example, the partial number of times the input has changed state is 4.
Both the total and partial counters are reset to 0.
Code to be sent
#PWDpassword#CLA
INSTALLATION MANUAL
Warning message when <IN> contact is closed
Sample text to be sent
#PWD123456#STR=Gate closed
Warning message when <IN> contact is opened
Sample text to be sent
#PWD123456#STO=Gate open
Setting input <IN> partial counter
Sample text to be sent
#PWD123456#COA=00005
Setting advanced functions
Sample text to be sent
#PWD123456#CTC=4
Checking the total number of times input <IN> has changed state
Sample text to be sent
#PWD123456#COU?
Checking the partial number of times input <IN> has changed state
Sample text to be sent
#PWD123456#COT?
Sample text to be sent
#PWD123456#CLA
String:
Gate closed
STRALM1:
Gate open
COA=00005
CTC=<4>
INC:
00143
COT:
00004
Counter reset
RECO-OK
Sample text received
Sample text received
Sample text received
Sample text received
Sample text received
Sample text received
Sample text received
GSM RIC 24 V -
13

Publicité

Table des Matières
loading

Table des Matières