Safety Instructions; Preparation; Before Operating - IBEA IDEA 42 Série Notice D'emploi Et D'entretien

Masquer les pouces Voir aussi pour IDEA 42 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SAFETY INSTRUCTIONS

GB
Training
1. Read the instructions carefully (fig. 2). Be familiar with the
controls and the proper use of the equipment.
2. Never allow children or people unfamiliar with these in-
structions to use the lawnmower.
3. Never mow while people, especially children, or pets are ne-
arby (fig. 3).
4. Keep in mind that the operator or user is responsible for ac-
cidents or hazards occurring to other people or their property.

Preparation

1. While mowing, always wear substantial footwear and long
trousers. Do not operate the equipment when barefoot or we-
aring open sandals.
2. Thoroughly inspect the area where the equipment is to be
used and remove all objects which may be thrown by the ma-
chine (fig. 3).
3. Operate only with either bag or Mulching plug in position .
4. WARNING - Petrol is highly flammable (fig. 4).
- Store fuel in containers specifically designed for this purpose.
- Refuel outdoors only and do not smoke while refuelling.
- Add fuel before starting the engine. Never remove the cap
of the fuel tank or add petrol while the engine is running or
when the engine is hot.
- If petrol is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and avoid
creating any source of ignition until petrol vapours have dis-
sipated.
- Replace all fuel tanks and container caps securely.
5. Replace faulty silencers.
6. Before using, always visually inspect to see that the blades,
blade bolts and cutter assembly are not worn or damaged. Re-
place worn or damaged blades and bolts in sets to preserve
balance.
Operation
1. Do not operate the engine in a confined space where dan-
gerous carbon monoxide fumes can collect.
2. Mow only in daylight or in good artificial light.
3. Avoid operating the equipment in wet grass, where feasible.
4. Always be sure of your footing on slopes.
5. Walk, never run.
6. For wheeled rotary machines, mow across the face of slopes,
never up an down.
7. Exercise extreme caution when changing direction on slo-
pes.
8. Do not mow excessively steep slopes (> 30%) (fig. 5).
9. Use extreme caution when reversing or pulling the lawnmo-
wer towards you.
10. Stop the blade(s) releasing the System 2 lever if the lawn-
mower has to be tilted for transportation when crossing sur-
faces other than grass and when transporting the lawnmower
to and from the area to be mowed.
11. Never operate the lawnmower with defective guards.
Make sure the chute door is closed or safety devices, such as
Mulching plug and/or catchers, are in place (fig. 6).
12. Do not change the engine governor settings or overspeed
the engine.
13. Start the engine or switch on the motor carefully according
to instructions and with feet well away from the blade(s).
Manuale serie IDEA P5090603 2015.indd 8
14. Firmly keep the lawnmower on level ground when starting
the engine.
15. Do not start the engine when standing in front of the di-
scharge chute if open.
16. Do not put hands or feet near or under rotating parts. Keep
clear of the discharge opening at all times (fig. 7).
17. Never pick up or carry a lawnmower while the engine is
running (fig. 8).
18. Stop the engine and disconnect the spark plug wire:
- before clearing blockages or unclogging chute;
- before checking, cleaning or working on the lawnmower;
- after striking a foreign object. Inspect the lawnmower for da-
mage and make repairs before restarting and operating the
lawnmower;
- if lawnmower starts to vibrate abnormally (check immedia-
tely).
19. Stop the engine whenever you leave the lawnmower and
before refuelling.
20. Reduce the throttle setting during engine shut down and,
if the engine is provided with a shut-off valve, turn the fuel off
at the conclusion of mowing.
Maintenance and storage
1. Keep all nuts, bolts and screws tight to be sure equipment is
in safe working condition.
2. Never store the equipment with petrol in the tank inside a
building where fumes may reach an open flame or spark.
3. Allow the engine to cool before storing in any enclosure.
4. To reduce the fire hazard, keep the engine, silencer, battery
compartment and petrol storage area free of grass, leaves or
excessive grease.
5. Check the grass catcher frequently for wear or deterioration.
6. Replace worn or damaged parts for safety.
7. If the fuel tank has to be drained, this should be done out-
doors.
8. Wear strong work gloves when removing and reinstalling
the blade (fig. 9).
9. Periodically check the blade which should always be kept
sharp. Please contact your IBEA dealer for blade sharpening
or balancing.

BEFORE OPERATING

Applying the handlebar (fig. 10)
Assemblying the grassbag(fig. 11)
Filling the crankcase with oil (fig. 1)
The engine is supplied without oil in the crankcase. Therefore,
before starting the engine,slowly pour about 0,60 l oil in the
sump (SAE30 or SAE10W-30).
ATTENTION:
Do not fill beyond level as this may damage the engine.
Do not mix oil with fuel. For further information we recom-
mend that you consult the manual supplied by the engine
manufacturer.
Filling the fuel tank (fig. 1)
8
23/12/15 10.02

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Idea 47 sérieIdea42bIdea42sbIdea47bIdea47sbIdea47sh

Table des Matières