Télécharger Imprimer la page

Poulan Pro PP3816A Manuel D'instructions page 9

Publicité

Les langues disponibles

Les langues disponibles

KNOW YOUR CHAIN SAW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Chain
Adjustment Tool
(Bar Tool)
Chain
Bar
Sprocket
Hole
Cylinder Cover
Throttle
Lockout
Rear
Handle
Throttle Trigger
Clutch Cover
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop the
engine.
THROTTLE TRIGGER
The THROTTLE TRIGGER controls engine
speed.
THROTTLE LOCK- -OUT
The THROTTLE LOCK- -OUT must be
pressed before you can squeeze the throttle
trigger. This feature prevents you from acci-
dentally squeezing the trigger.
CHOKE/FAST IDLE LEVER
The choke and fast idle are set by pulling the
CHOKE/FAST IDLE LEVER out to the full ex-
tent for cold starting or after refueling. The
choke provides additional fuel to the engine
during cold starting.
PRIMER BULB
The PRIMER BULB circulates fuel to the car-
buretor to provide quicker starting.
OPERATION
Front Hand Guard
Muffler
Bar Oil Fill Cap
Starter Housing
Bar Nuts
Front Handle
Starter Rope
Fuel Mix Fill Cap
Chain
Brake
Adjusting Screw
Chain
Catcher
CHAIN BRAKE
The chain brake is a device designed to stop
the chain if kickback occurs. The chain brake
activates automatically in the event of kick-
back. The chain brake activates manually if the
front hand guard is pushed forward. The chain
brake is disengaged by pulling the front hand
guard back toward the front handle as far as
possible.
CHAIN TENSION
It is normal for a new chain to stretch during the
first 15 minutes of operation. You should check
your chain tension each time before you start
the chain saw. See CHAIN TENSION under
the ASSEMBLY section.
WARNING:
with a loose chain, the chain could jump off
the guide bar and result in serious injury to
the operator and/or damage the chain mak-
ing it unusable.
9
ON/STOP
Switch
Choke/
Fast Idle
Lever
Primer Bulb
Chain
Direction
of Travel
Guide Bar
If the saw is operated

Publicité

loading

Ce manuel est également adapté pour:

Pp4218aPpr4218a