Stealth Cam XS Serie Manuel D'instructions page 8

This XS Series features 3 distinct modes of operation: QSET1 / QSET2 / CUSTOM.
Each setting is activated by cycling the UP or DOWN buttons.
QSET1 – This is the 1st Quick Set programming mode. When the camera is changed to this
mode, the display screen will give a digital readout of the following:
- 9 Photo Delay – (Delay) Counts down from 9sec to 0sec
st
1
- rdY – (Ready) Camera is in a ready and active state
nd
2
With this setting the camera is preprogrammed to take photos at MED resolution, a 30 second
timeout delay between activations and takes 1 photo every trigger activation.
QSET2 – This is the 2nd Quick Set programming mode. When the camera is changed to the this
mode, the display screen will give a digital readout of the following:
- 9 Video Delay – (Delay) Counts down from 9sec to 0sec
st
1
- rdY – (Ready) Camera is in a ready and active state
nd
2
With this setting the camera is preprogrammed to take a 10 second video, a 30 second
timeout delay between activations.
www.stealthcam.com
877-­‐269-­‐8490
CAMERA PROGRAMMING
8
Page