Stealth Cam XS Serie Manuel D'instructions page 12

ADVANCED OPTIONS: To access the advanced options press and hold the ENTER button while in the
custom configuration settings. Alternatively to exit the advanced options press and hold the ENTER
button on any screen within the advanced options to return to the main menu.
FACTORY RESET – (NO default): This setting is used to reset the camera to its factory defaults.
With this option blinking, pressing the UP or DOWN arrows will switch between the options of
NO or YES. When the YES option is chosen and the ENTER button is pressed the camera will default
all configurations made up to this point. Once reset is completed, the screen will flash
DONE and return to the advanced options menu.
DELETE SD CARD – (NO default): This setting is used to format the SD memory card installed. This will
also delete ALL FILES from the card. This is always recommended when a brand new card is
being used. With this option blinking, use the UP or DOWN arrows to move between the
options of YES or NO. When YES is chosen you will see the screen say dEL* * * , then DONE. Once
completed the screen will return back to the advanced options menu.
www.stealthcam.com
877-­‐269-­‐8490
CAMERA PROGRAMMING -­‐ CUSTOM (CONT
12
Page