Cable Assembly - Abicor Binzel ABIPLAS WELD 250 M Mode D'emploi

®
ABIPLAS WELD 250 MT

9.2 Cable assembly

BAL.0311 • 2018-02-05
1 Check screw and plug-type connections for visible damage and tight fit and
replace them if necessary.
WARNING
Risk of injury
Serious injuries may be caused by parts swirling around.
• When cleaning with compressed air, wear suitable protective clothing, in
particular safety goggles.
CAUTION
Material damage
Impurities destroy the inside of the welding torch.
• Never blow compressed air into the nozzles from the front.
2 Clean lines by blowing compressed air through them from behind.
9 Maintenance and cleaning
EN - 19