user's instructions
7. The appliance is now ready for use. You can move the vacuum cleaner while you are cleaning by
pulling on the hose grip. You can lift the appliance with the vacuum cleaner's handle.
8. You can adjust the vacuum suction with the vacuum suction control (5). It is advisable to
reduce the vacuum suction when cleaning upholstered furniture and curtains. This will prevent the
fabric from being sucked into the nozzle.
Accessories
This vacuum cleaner is supplied with one combined accessory:
•
a crevice tool with a narrow nozzle, which you can use to clean radiators, window frames, crevices,
small openings, and similar;
•
a dusting brush, which you can use to clean delicate or irregular surfaces, furniture, Venetian
blinds, and similar.
operAtion - storage after use
1. Remove the plug from the wall socket.
2. Press the rewind button and keep it pressed in; the power cord will automatically rewind onto the reel.
Guide the power cord whilst it rewinds onto the reel, since otherwise the cord could become tangled or
the plug could strike the back of the appliance. Take hold of the power cord near the mark, and allow it
to gently slide through your fingers back into the appliance, see Figure 8.
3. Stand the vacuum cleaner upright. An attachment slot for the accessory bracket is fitted to the back of
the vacuum cleaner next to the front castor (see Figure 9). Slide the bottom of the accessory bracket
into the slot. This avoids the need to dismantle the vacuum cleaner after use; you can
store the assembled appliance and retrieve it again quickly when you need it.
Figure 6
On/Off switch
Figure 7
Figure 8
Rewinding the power cord
27