Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
End/Anti-creasing symbol is on.
•
Crease Guard programme is activated in order to prevent laundry that has remained in the machine from
creasing. >>> Turn off the dryer and take out the laundry.
End symbol is on.
•
Programme is over. Turn off the dryer and take out the laundry.
Lint Filter Cleaning symbol is on.
•
Lint filter is not cleaned. >>> Clean the lint filter.
Lint Filter Cleaning symbol is flashing.
•
Filter housing is clogged with lints. >>> Clean the lint filter housing.
A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter with
•
warm water.
•
Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
Water leaks from the loading door
•
Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the loading door
gasket. >>> Clean the inner surfaces of the loading door and the surfaces of the loading
door gasket.
Loading door opens spontaneously.
•
Loading door is ajar. >>> Push the loading door to close until you hear a locking sound.
Condensate Tank warning symbol is on/flashing.
Condensate tank is full. >>> Drain the condensate tank.
•
•
Water draining hose is bent. >>> If the product is connected directly to a wastewater drain, check the water
drain hose.
Filter Drawer Cleaning warning symbol is flashing.
Filter drawer is not cleaned. >>> Clean the sponge and the filter cloth in the filter drawer.
•
Dryer / User Manual
117 / 120 EN
Publicité
