Operating the product
4.14 Canceling the programme
To cancel the programme after the dryer is started:
•
Press and hold Start / Pause button for 1 seconds
to pause the programme and turn the programme
selection knob.
•
Press and hold On / Off / Cancel Button for 3
seconds and the programme will be cancelled.
A
As the dried laundry will be excessively
hot when you cancel the programme
while the dryer is running, activate the
Refresh programme to cool them down.
4.15 End of programme
When the programme comes to an end Lint filter
cleaning and condensate tank warning symbols light
up in the programme follow-up indicator. To turn off the
dryer press On / Off / Cancel button.
C
2-hour Crease Guard program will be
activated if the laundry is not taken out
after the program has come to an end.
C
Clean the lint filter after each drying. See
5.1 Cleaning lint filter and loading
door inner surface.
C
Drain the condensate tank after each
drying cycle. See 5.3 Draining the
condensate tank.
Dryer / User Manual
111 / 120 EN