Publicité
Les langues disponibles
Les langues disponibles
Operating the product
4.10 Starting the programme
Press the Start/Pause button to start the program.
Start
symbol will light up to indicate that the
programme has started and ":" symbol in the middle
of the remaining time will keep flashing. Drying and
programme progress bar will be displayed alternately.
4.11.Progress of programme
4.12 Childproof Lock
Machine is equipped with a Childproof Lock which
prevents interfering with the current programme flow by
pressing any button.
To activate the Childproof Lock:
•
Press and hold Childproof Lock button for 3
seconds.
•
Childproof
Lock symbol will appear on the display
when the
Childproof
•
All buttons except the On/Off/Cancel and
Childproof
Lock button on the control panel are
deactivated when the
•
Display symbols will not change even if the position
of Programme Selection knob is changed while the
Childproof
lock button is active.
•
When the programme selection knob is turned
and function buttons are pressed
warning will be displayed.
•
To start a new programme after the current
programme is over or to interrupt the current
programme, the
Childproof
deactivated.
110 / 120 EN
Lock is activated.
Childproof
Lock is active.
Childproof
Lock
Lock should be
To deactivate the childproof lock:
•
Press and hold
Childproof
seconds.
•
Childproof
Lock is deactivated when the dryer is
switched off and on with On/Off/Cancel button.
4.13 Changing the programme after it
has started
•
After the dryer starts operation, you can change
the selected programme and dry your laundry in a
different programme.
•
Press and hold Start / Pause button for 1 seconds
to pause the programme.
•
Select desired programme by turning the
Programme Selection knob.
•
Press the Start/Pause button to start the program.
Adding / removing laundry while the dryer is
in operation
•
In order to add or take out laundry after the drying
programme has started:
•
Press the Start/Pause button to switch the dryer to
Pause mode. Drying process will pause.
•
While in Pause mode, open the loading door, add
or take out laundry and close the loading door.
•
Press the Start/Pause button to resume the
program.
C
Any laundry added after the drying
process has started may cause the clothes
that are already dried in the machine
intermingle with wet clothes and the
result will be wet laundry after the drying
process is over.
C
You may repeat laundry adding or
removing process as many times as you
desire during drying. However, this process
will increase the programme time and
energy consumption since the drying
process will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme has
started.
C
If you select a new programme by turning
the Programme Selection knob while your
drier is in Pause mode, then the current
program is aborted and new programme
information is displayed.
Do not touch the inner surface of the drum
when adding or taking out laundry while a
programme is running. Drum surface and
dryer air within is hot.
Lock button for 3
Dryer / User Manual
Publicité
