Publicité
Les langues disponibles
Les langues disponibles
USE & TIPS
"COLD AREA" indicator
The sign opposite can be found in your fridge.
It clearly shows the coldest zone of your appliance, where the temperature is lower than
or equal to +4°C.
A temperature gauge in this zone allows you to check the settings of your fridge.
Adjust the thermostat
Temperature correct
ok
Warning!
If the door of the fridge is left open for too long, the temperature inside the fridge will rise. Check the
temperature gauge within 30 seconds after opening the door to make sure that the reading is correct.
Setting the refrigerator:
Control panel
Plug on your appliance. The internal temperature is controlled by a sensor. There are 8 settings:
0,1,2,3,4,5,6,7. 1 is warmest setting and 7 is coldest setting,0 is off.
The appliance may not operate at the correct temperature if it is in a particularly hot or if you open
the door often.
Neither fridge or freezer compartment works when the setting is OFF
Setting the humidity in the Crisper:
• Low humidity: move the regulator to the left
• Hight humidity: move the regulator to the right
Publicité
