Gaggenau RY 491 Instructions D'installation page 14

Installation instructions
The following installation instructions describe the installation
steps for various appliance types.
Therefore the diagrams may not be a true representation of
your appliance.
Particular reference is made to special installation steps for
individual appliance types.
1. Checking the installation cavity
m
CAUTION
To ensure a safe, trouble-free installation and an
optimum overall view of the subsequent furniture
front, thoroughly check that the installation cavity
complies with the installation requirements.
Before starting the installation, check that the installation cavity
complies with all requirements for a safe and trouble-free
installation.

Check the base.
Follow the instructions in the section on "Installation
location" on page 7.

Check the dimensions of the cavity.

Check that the cavity is square.

Check location of the socket.
Also follow the instructions in the section on
"Connecting the power" on page 8 and in the section on
"Installation dimensions" on page 9.

Check location of the water connection
(only for appliances with ice maker).
Also follow the instructions in the the section on
"Connecting the water" on page 8.

Check attachment of the adjacent furniture/fixtures.
All furniture parts in the vicinity of the appliance must be
connected securely to the wall.

Check that adjacent furniture/fixtures do not collide
(door opening angle).
14
2. Transport of the appliance
m
The appliance is very heavy.
Be careful, otherwise people who are helping may be
injured or the appliance may be damaged.

Transport the appliance to a suitable installation location
with suitable means of transportation (trolley, lifting truck
m
or hand-driven truck).

Secure the appliance during transportation to prevent it
from overturning.
The appliance is 83
cannot be transported in an upright position due to the
structural conditions, the appliance can be transported
horizontally.
m
Do not erect the appliance via the side panels.
Risk of damage to the appliance!
When erecting the appliance, observe the required minimum
height at the installation location according to the following
table:
Erection via
appliance rear
Minimum height
86" / 2185 mm
m
Always place the means of transport centrally on the
rear side of the appliance. Never push it in from the
front or from the side under the appliance.
Risk of damage to the appliance!
WARNING
21
/ " (2125 mm) tall. If the appliance
32
CAUTION
Erection via
appliance side panel
Do not erect the
appliance via the side
panels!
CAUTION
m
m
m