CasaFan SATIN METAL BREEZE Instructions De Montage Et De Service page 14


About this operating instructions
Before using the CasaFan fan, read the operating instructions carefully. Keep the operating
instructions within reach. Never pass the fan onto another person without the operating
instructions.
Explanation of symbols:
Dangerous electric voltage
Warn the user of the dangers caused by
electricity
Describing the CasaFan fan
The fan is for circulating room air. Their use in machines which are outside and unprotected, in
garages, in moist or wet rooms or rooms in danger of fire or explosion, is not permitted. All units
are fitted with an oscillation function. This can be switched off even when fan is in use, and/or
the blade is revolving. The oscillation is fitted with a slip clutch.
Technical data:
Mains voltage:
Power:
Protection clas:
No of speeds:
Dimensions Ø x H (mm)
Weight (kg):
Caution! Only operate the unit when completely assembled!
- Unpack the CasaFan fan, check if everything is present (see Figure) and for visible signs of
damage.
1. Front guard
2. Blade
3. Screw (2x)
4. Rear guard
5. Motorunit
- Dispose of packaging taking the environment into account and keep out of the reach of
children.
Assembly
Please proceed as per Figure 1 - 8 on Page 4 of these operating instructions.
TRANSLATION OF THE ORIGINAL OPERATING INSTRUCTIONS
Particular note for the user.
Satin Metal Breeze SV40-SM
6. Rod
7. Adjustment screw
8/9. Base
10. Washer
11. Threaded pin
Careful
230 V ~ / 50 Hz
60 W
I / IPX0
3
450 x 1390
7,4
12. Power cable
13. Oscillation OFF
14. Oscillation ON
15. Screw
GB
14