Publicité
Les langues disponibles
Les langues disponibles
This air conditioner is not equipped with
an auto flap. (Manual adjusting only)
OI-751-21-EG
Adjusting the Airflow Direction (continued)
Semi-concealed type
1-way type (AS)
Hold the flap and move it up and down to adjust the direction of the airflow.
When the flap moves, the line engraved on the rim of the disc will move up and down.
In the cool mode, manually adjust the angle of the flap so that the indicator is in line with the
blue rectangular mark on the label.
Otherwise, condensation may drip onto the floor.
In the heat mode, adjust the flap so that the indicator is in line with the red rectangular mark.
Floor standing type (F, FM)
It is possible to change the airflow direction.
Remove the air discharge grille by sliding it
to the right and then lifting it out. Turn the
grille as desired (90, 180, or 270 degrees)
and then replace it.
Concealed duct type (U, D)
This air conditioner is not equipped with air outlet parts. These must be obtained locally. Please
refer to the manual of the locally adopted air outlet parts.
Flap
Label
Indicator
disc
Air discharge
grille
Indicator line
For cooling
(blue)
For heating (red)
Valve
side
21
Publicité
