ETNA KI680 Mode D'emploi page 43

OPERATION
Timer control
Using the minute minder
1. Switch on the hob.
2. Touch the timer key to switch on the timer.
In the timer's display flashes "00".
▷
3. Within 10 seconds select a cooking time with the '-' or '+' timer key.
4. The minute minder has been set.
When the time is set, it will begin to countdown immediately.
▷
▷ The timer alarm beeps after the set time has passed.
Touch any key to stop the alarm; alternatively it will switch off automatically after
▷
2 minutes (switch Off time can be adjusted; see 'Settings').
▷ The display will show the remaining time.
The minute minder function will remain activated even when the cooking hob is
▷
switched Off.
▷ During the last minute of countdown, remaining time will be displayed in seconds.
Using the cooking timer
1. Switch on the hob and select a cooking zone and power level.
2. Touch the timer key to switch on the timer.
In the timer's display flashes "00".
▷
3. Touch the timer key again.
The point from the relevant cooking zone next to the timer display and the time are
▷
flashing.
▷ Touch the timer key as many times as necessary, to select the cooking zone of which you
want to set the timer.
EN 17