Publicité
Les langues disponibles
Les langues disponibles
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
Amplifier section
Stereo mode
Surround mode
* Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
Outputs (Analog)
Outputs (Digital)
Super Audio CD/DVD system
Laser
Signal format system
Frequency response (at 2 CH STEREO mode)
Signal-to-noise ratio
Harmonic distortion
US
90
With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated
120 watts per channel minimum RMS power, with no more than 0.7 %
total harmonic distortion from 250 millwatts torated output.
120 W + 120 W (6 ohms, 20 – 20,000 Hz, THD 0.7 %)
Front: 120 W + 120 W
Center*: 120 W
Rear*: 120 W + 120 W (6 ohms, 20 – 20,000 Hz, THD 0.7 %)
ANALOG IN:
Sensitivity: 150 mV
Impedance: 50 kilohms
DIGITAL IN OPTICAL:
Sensitivity: –
DIGITAL IN COAXIAL:
Sensitivity: 0.5 V
Impedance: 75 ohms
ANALOG OUT:
Voltage: 2 V
Impedance: 1 kilohms
SUBWOOFER ANALOG OUT:
Voltage: 3 V
Impedance: 47 kilohms
PHONES:
Accepts low- and high-impedance headphones
DIGITAL OPTICAL OUT
Sensitivity: –
Semiconductor laser
(Super Audio CD/DVD: λ = 650 nm)
(CD: λ = 780 nm)
Emission duration: continuous
NTSC
DVD (PCM): 2 Hz to 22 kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0 dB)
More than 80 dB (VIDEO 1 (AUDIO) connectors only)
Less than 0.03 %
Publicité
