Sony AVD-C70ES Mode D'emploi page 37

Resuming Playback from
the Point Where You
Stopped the Disc
When you stop the disc, the receiver
remembers the point where you pressed x
and "RESUME" appears on the front panel
display. As long as you do not remove the
disc, Resume Play will work even if the
receiver enters standby mode by pressing
[/1.
H
1
While playing a disc, press x to
stop playback.
"RESUME" appears on the front panel
display, so you can restart the disc
from the point where you stopped the
disc.
If "RESUME" does not appear,
Resume Play is not available.
2
Press H.
The receiver starts playback from the
point where you stopped the disc in
Step 1.
z
twice, then press H.
Notes
• Depending on where you stopped the disc, the
(Resume Play)
• The point where you stopped playing is cleared
x
To play from the beginning of the disc, press x
receiver may not resume playback from exactly the
same point.
when:
– you turn the power off by pressing POWER on
the receiver.
– you change the play mode.
– you change the setting on the Setup Menu.
US
37