6 Press ENTER.
The station is stored.
v
TUNED
ST
FM
MHz
7 Repeat 1 to 6 to store other stations.
To tune in a station with a weak signal
Press m or M repeatedly in 3 to tune in the station manually.
To change the preset number
Start over from 1.
To change the AM tuning interval
The AM tuning interval is factory set to 9 kHz (10 kHz in some areas).
To change the AM tuning interval, tune in any AM station first, then turn off the receiver by
pressing [/1 on the remote. While holding down x (on the receiver), turn on the power using
the remote. When you change the interval, AM preset stations will be erased.
To reset the interval, repeat the same procedure.
US
33