Sony AVD-C70ES Mode D'emploi page 55

Automatically decoding
the input audio signal
Decoding)
The auto decoding function automatically
detects the type of audio signal being input
(Dolby Digital, DTS, or standard 2 channel
stereo) and performs the proper decoding if
necessary. This mode presents the sound as
it was recorded/encoded, without adding any
effects (e.g. reverberation).
However, if there are no low frequency
signals (Dolby Digital LFE, etc.), it will
generate a low frequency signal for output to
the subwoofer.
SOUND
FIELD
Press AUTO DEC on the receiver or
SOUND FIELD on the remote repeatedly
until "AUTO DECO.(AUTO DECODING)"
appears on the front panel display.
The auto format decode function is
activated.
Enjoying Surround Sound
(Auto
You can take advantage of surround sound
simply by selecting one of the receiver's
pre-programmed sound fields. They bring
the exciting and powerful sound of movie
theaters and concert halls into your home.
To select the sound field, press AUTO DEC,
2CH ST, or MODE on the receiver or
SOUND FIELD on the remote repeatedly
until the sound field you want appears on
the front panel display.
Sound field
Auto Decoding
Normal surround
Cinema Studio EX A
Cinema Studio EX B
Cinema Studio EX C
Hall
Jazz Club
Live Concert
Game
2ch Stereo
* Use DCS Technology
About DCS (Digital Cinema Sound)
In the collaboration with Sony Pictures
Entertainment, Sony measured the sound
environment of their studios and integrated
the data of the measurement and Sony's own
DSP (Digital Signal Processor) technology
to develop "Digital Cinema Sound".
"Digital Cinema Sound" simulates in a
home theater an ideal movie theater sound
environment based on the preference of
movie director.
Display
AUTO DECO.
N.SURROUND
C.S.EX A*
C.S.EX B*
C.S.EX C*
HALL
JAZZ CLUB
L.CONCERT
GAME
2CH STEREO
continued
55
US