Ergomotion Rio 3.0 Manuel De L'utilisateur page 12

Remote control pairing & child lock
REMOTE PAIRING
Note: The original remote that comes in the box is already paired to the adjustable
base. No further action is required. In the event that the remote is not paired with
the base, follow the steps below.
STEP 1
Unplug the Power Cord from your power outlet. Wait 1 minute, then plug it back
in to your power outlet. Perform Step 2 within 10 seconds, while the control box
light is flashing.
STEP 2
Remove the cover on the back of the remote and hold
the PAIR button. The PAIR button will illuminate and
start to flash. When the PAIR button stops flashing, the
pairing LED light on the control box will stop illuminating.
Release the PAIR button on the remote.
STEP 3
Test all remote functions. If the remote buttons do not impact the adjustable base
movements, please repeat the process again or call Ergomotion customer service:
1-888-550-3746
10
CHILD LOCK
ACTIVATE CHILD LOCK:
Press and hold FLAT and HEAD UP buttons
for 3 seconds. When the backlight on the
remote flashes 2 times, that means the lock
is completed.
When a button is pressed in Child Lock
mode, the backlight on the remote will flash
twice.
DEACTIVATE CHILD LOCK:
Press and hold FLAT and FOOT UP buttons
for 3 seconds. When the backlight on the
PAIR
button remote flashes 2 times, that means the
unlock is completed.
The remote will now operate normally.