Napoleon Ascent 42 Serie Manuel D'installation Et D'utilisation page 51
Masquer les pouces
Voir aussi pour Ascent 42 Serie:
- Manuel d'installation et d'utilisation (148 pages)
Publicité
Les langues disponibles
Les langues disponibles
9.7
log placement
WARNING
!
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
•
The logs are fragile and should be handled with care.
PHAZER
logs and glowing embers, exclusive to Napoleon, provide a unique and realistic glowing effect that is
TM
different in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log
colours may vary. During the initial use of the appliance, the colours will become more uniform as colour pigments
burn in during the heat activated curing process.
1
1
Stud (Log #1)
Stud (Log #1)
Studs (Log #3)
Studs (Log #3)
2
2
1
1
A1
A1
Place log #1 (W135-0693) firmly onto A1 and A2
located on the rear of the support tray.
Place log #1 (W135-0693) firmly onto A1 and A2
located on the rear of the support tray.
4
4
1
1
B1
B1
Place log #2 (W135-0697) onto B1 and B2 located on
the right side of the support tray.
Place log #2 (W135-0697) onto B1 and B2 located on
the right side of the support tray.
Support Tray
Support Tray
A1
A1
C1
C1
A1
A1
C1
C1
B1
B1
C2
C2
B1
B1
C2
C2
D1
D1
Burner Ports
D1
D1
Burner Ports
Burner Overview
3
3
A2
A2
Ensure log #1 sits flat and does not cover the pilot
opening. Place two pins in the holes located on the
Ensure log #1 sits flat and does not cover the pilot
top of log #1.
opening. Place two pins in the holes located on the
top of log #1.
5
5
2
2
B2
B2
Place log #3 (W135-0695) onto C1 and C2 located on
the left side of the support tray.
Place log #3 (W135-0695) onto C1 and C2 located on
the left side of the support tray.
48.1
Pilot Opening
Pilot Opening
A2
A2
Stud (Log #1)
A2
A2
Stud (Log #1)
Burner Ports
Burner Ports
Studs (Log #2)
Studs (Log #2)
B2
B2
B2
B2
Stud (Log #5)
Stud (Log #5)
PINS
PINS
1
1
1
3
1
3
C1
C1
C2
C2
W415-3095 / A / 05.03.22
finishing
EN
Pilot
Opening
Pilot
Opening
2
2
51
Publicité
